Joined in 2023 
82 
63 About this deal
In-built oscillator with 52KHz frequency with power conversion efficiency up to 92%, higher the output voltage higher is the efficiency. ADD-RGB equipment can be compatible with 12V RGB motherboard via the convertor, to achieve synchronous lighting compatibility. This design has a 22µF “output” capacitor. But I already have a 100µF capacitor as an “entry” to the A4988 stepper. PCB space is VERY limited for me. Can I just use the 100µF and drop the 22?
Converter USB 5V to 12V (Power Bank - Makro Step Up Voltage Converter USB 5V to 12V (Power Bank - Makro
you can also buy an usb controller for your argb or manual controller of some sort. if you dont have an argb 5v header. Are you in search of a reliable and high performance but simple 5v to 12v boost converter circuit? So here, in this comprehensive post, we have provided an insight of DC to DC Boost Converter & Modules, its schematic circuits, datasheet, pinout, features, and intended applications. Simillary to my question in 1), the 5V rail has 0.1µ, 4.7µ and 22µF capacitor, can I do the economy of at least one of these (once again, PCB space reducing)?After the MOSFET is turned off, the magnetic field of the Inductor turns in to voltage spike and it goes through the Schottky diode. Hence this voltage spike will be exhibited as output in the circuit. As there is a capacitor in the output, it charges in every cycle of oscillation and keeps the voltage constant. In this voltage booster circuit components are used to boost 5v to 12v. Above all for MT3608 to start working, the EN pin should be tied to high. If you want to turn on and off the output with an external circuit you can use this pin. This circuit is capable of delivering 2A current to the Load. ADJUSTABLE OUTPUT VOLTAGE: I have shared my project on easyEda at: https://easyeda.com/editor#project_id=9220fa26c27845ae8d1bbd93b3a543d9 isolation if you plan to power a device which is somehow connected to the mains as well. That way you wont fry your computer if your computer and the device are not on the same phase.
DC DC Converters | Electronic Components Distributor DigiKey
The LT1173 is a versatile micropower DC-DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. Supply voltage ranges from 2.0V to 12V in step-up mode and to 30V in step-down mode. The LT1173 functions equally well in step-up, step-down or inverting applications.I was thinking of buying an ARGB Hub (5v3pin hub), and I'll have the said components connected to that - then will connect the 5v3pin hub to the Deepcool Converter > to my motherboard.
Converter, 5V To 12V USB Step Up Voltage Qutaway Step Up Converter, 5V To 12V USB Step Up Voltage
Below schematic is implemented using variable output high efficiency IC MT3608. A compact and small form factor of this module/IC makes it possible to install this IC in size and weight imperative devices. Also works on very low current drawing loads contrary to its competitors. If you’re looking to power your micro-controller based project or its associated peripherals, we would highly recommend procuring a DC to DC Step-Up module. Not only are they designed to occupy minimal space, but also many of these modules have adjustable output voltages, making them ideal for a wide range of applications. A hub only adds more headers if you have a motherboard with 1 3-pin 5v header. My motherboard has 0 3-pin 5v headers.This USB 5v to 12v converter is most useful for powering up the WiFi router and decorative LED strip.
Great Deal 
New Comment