Seagate BarraCuda, 2TB, Internal Hard Drive, 3.5 Inch, SATA 6GB/s, 7.200 RPM, 64MB Cache, for Computer Desktop PC, FFP (ST2000DM008)
About this deal
If a Serial ATA drive, installed as additional storage in your computer, was previously detected but is no longer detected, this set of troubleshooting steps will attempt to get the drive detected again, or to conclude whether the drive has failed and should be replaced. First, please see Document ID: 196169 for more information on installing drives and Document ID: 188411 about the proper drivers in Windows (though if your computer's boot drive is SATA, there should be no need for additional drivers).
The simplest way to reinstall the operating system (and probably erase the data, though that does not happen every time) is to insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. The option to repair Windows should appear as well as an option to reinstall Windows. Since the repair has failed, simply choose to reinstall Windows.
Vergelijking met andere schijven
Vereisten voor systeemgeheugen: 1 GB en hoger voor 32-bits systemen; 2 GB en hoger voor 64-bits systemen. Each Seagate hard drive engages in regular self-tests, and most computers automatically run regular SMART tests on the hard drive(s) installed on them. SMART tests indicate whether a drive is approaching imminent failure. Thus, if a SMART error appears suddenly, it virtually always means, unfortunately, that the drive is about to fail and should be replaced. Disconnect all external storage devices such as external USB, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption.
Access the BIOS by rebooting the computer and, while it is in the process of booting, before the Windows screen appears, press the key that will open the BIOS. This key will vary by computer make and model, but it is often Escape, Delete, F1, or F2. Consult your computer manufacturer if you are unable to enter the BIOS. Once you connect a new Serial ATA drive in your computer, there remains more to do to get your drive working.Windows Vista en nieuwerNative ondersteuning voor opstartschijven van 3 TB is alleen op UEFI BIOS-systemen en met gebruik van GPT-partities. Please remember that these third-party programs do not have proprietary access to Seagate hard disk information, and therefore often provide inconsistent and inaccurate results. SeaTools is more consistent and more accurate and is the standard Seagate uses to determine hard drive failure. Lyve: Periferie-naar-cloudplatform voor massaopslag Lyve Cloud: Voordelige objectopslag, ontworpen voor de multicloud